Oxygen 3000 plus

Κωδικός: 6943

Digital Broadcast Console

Επικοινωνήστε

Προ-Παραγγελία

Enquire Ζητείστε να ενημερωθείτε με το που είναι διαθέσιμο

Oxygen 3000 Plus: much more than a Digital Broadcast Mixer

A full range of powerful features for Radio On-Air and Production available in 3 different formats and flexible configurations: 8, 12 and 16 faders with 1 or 2 Audio I/O Boards and 16+16 or 32+32 Dante™ I/O.
Oxygen 3000 Plus is the best-equipped console of its category: Low Latency, Users Preset, Smart Keys, EQ, Compressors, Telephone Hybrid, HDMI Output, Analogue and Digital I/O, USB, Bluetooth, Dante™ AoIP, Telco, Presenter Talk Box, Streaming In/Out.

The DSP based processing guarantees high-end quality audio and of course you will find the easiness of use that marks all the AxelTech’s products.
Oxygen Remoter Software, which enables up to 8 additional virtual faders for a full I/O control is available on Oxygen 3000 Plus as it is, for free, in any Oxygen Digital Console model.

Βασικά Χαρακτηριστικά
Specifications:

Input & Output with 1 Audio I/O Board
5 microphone inputs with Automix
2 stereo analogue inputs, up to 4 Stereo analogue inputs using other input sources
4 stereo analogue outputs
1 built-in telephone hybrid or 1 Telco with GPIO
Up to 4 Telco using other input sources
1 Bluetooth audio interface or 1 stereo analogue input
1 digital In (AES/EBU) or 1 USB Input (play)
1 digital Out (AES/EBU)
2 USB audio Input (play)
1 USB audio Output (rec)
1 Streaming In + 1 Streaming Out
16 inputs + 16 outputs or 32 inputs + 32 outputs via Dante™ (optional) configurable as mono/stereo/telco
Input & Output with 2 Audio I/O Boards
10 microphone inputs with Automix
4 stereo analogue inputs, up to 8 Stereo analogue inputs using other input sources
8 stereo analogue outputs
1-2 built-in telephone hybrid or 1-2 Telco with GPIO
Up to 8 Telco using other input sources
1-2 Bluetooth audio interface or 1-2 stereo analogue input
1-2 digital In (AES/EBU) or 1-2 USB Input (play)
2 digital Out (AES/EBU)
4 USB audio Input (play)
2 USB audio Output (rec)
1 Streaming In + 1 Streaming Out
16 inputs + 16 outputs via Dante™ (optional) configurable as mono/stereo/telco
General
Fully Digital Broadcast Console for Radio Broadcasting with 8, 12 or 16 faders
Knob with A/B Fast source switch or source selection for each fader
4+1 busses (PGM, SUB, Aux1, Aux2, PFL)
Near 0 latency (< 0,7 ms I/O)
Digital Signals Routing 50×50 matrix with direct Input to Output
Assignable Stereo N-1 on any output
Complete Remote Control by means of an application replicating the surface
Remote configuration and maintenance via Web Interface
User-definable Presets & Snapshots
5 bands fully parametric Equalizer on each input
Dynamic Processor with expander and compressor section on each microphone input
Advanced and configurable Monitor Facilities for Control Room and Studio
Customizable RGB colored buttons
7” TFT IPS Graphic Color Display for console configuration
Four 2,2” TFT IPS displays for the output levels monitoring
2,2” TFT IPS displays on top of each fader displaying channel status, levels and source name
HDMI Out for console status display
2 Timers (Ctrl-Room and Studio microphones on HDMI Monitor)
START/ON Buttons for each fader
4 recall Snapshot buttons
4 direct Talkback buttons
RGB led Bar for each fader
Studio & Control Room Monitor Section
8 customizable Smartkey Buttons
2 customizable Function Keys for each fader
TalkBox for guest and presenter (optional)
Redundant PSU (optional)
Built In Decoder and Streamer
Oxygen 3000 Plus, in addition to analog/digital/AoIP inputs and outputs, are open to integration with the IP world, thanks to the ability to decode two audio streams (each stereo or mono) as input and generate an output audio stream (stereo or mono).

Analog Balanced Stereo Inputs
Connector: XLR & RJ45 Balanced – EMI Suppressed
Input Impedance: 10 KΩ
Nominal Input Level (sensitivity): 0 dBu
Max Input Level (clipping point): +18 dBu
A/D conversion: 24 bit / 48 Khz
Frequency response: +/-0,5 dB from 20 Hz to 20 kHz
Signal To Noise Ratio: (referred to peak level) >110 dB
Stereo Separation: (referred to peak level) >90 dB
THD+N: <0,002 %
Analog Balanced Telco Input
Connector: RJ45 Balanced – EMI Suppressed
Input Impedance: 10 KΩ
Nominal Input Level (sensitivity): 0 dBu
Max Input Level (clipping point): +18 dBu
A/D conversion: 24 bit / 48 Khz
Signal To Noise Ratio: (referred to peak level) >110 dB
THD+N: <0,002%
Digital Input
Connector: Balanced on 1 XLR – EMI Suppressed
Input Impedance: 110Ω
Standard: AES3
Audio Sample Rate: 32/44.1/48/96/192 KHz with SRC
Resolution: 24 bit
Dynamic Range (Converter Values): 124dB
Analog Balanced Stereo Outputs
Connector: RJ45 Balanced – EMI Suppressed
Output Impedance: 23 Ω, nominal 600 Ω
Nominal Output Level: 0 dBu
Max Output Level (clipping point): +18 dBu
D/A conversion: 24 bit / 48 Khz
Signal To Noise Ratio (referred to peak level): >110 dB
Stereo Separation (referred to peak level): >90 dB
THD+N: <0,002 %
Dante I/O
Sample Rates (16x16 Versions): 44.1/48/88.2/96 kHz
Sample Rates (32x32 Versions): 44.1/48/88.2/96 kHz
Audio Flows In/Out: Up to 32x32 simultaneous streams
Digital Audio Formats: TDM, I2S
Audio Transport Formats: Dante Audio over IP, AES67 RTP, SMPTE ST2110-30 RTP (enrolled devices)
Sample Bit Depth: 16, 24 or 32 bits per sample
Audio Buffering: Up to 2000 samples per channel
Clocking: Onboard word clock or external word clock
Form Factor: Card edge module. 4.5cm x 6cm (1.75” x 2.4”)
FPGA: High performance Xilinx Spartan6 FPGA
Microprocessor: Soft-core Microblaze processor
Clock: High quality, low jitter onboard SiLabs
Ethernet: Standard RGMII/MII interface for Ethernet PHY or switch chip
Power: 3.3VDC @ 2W max
Physical Connector: Mini-PCI

Control Interfaces: SPI Master and Slave; GPIO; I2C
Network: RGMII/MII
USB Audio Digital I/O
Connector: USB Type B – EMI Suppressed
Playback And Recording Sample Rate: SRC 44.1-48 KHz
Resolution: 16 bit
Available Stereo Channels: 2 stereo USB - 2 Inputs & 1 Output on each Audio I/O Board
Analog Balanced Talkbox Outputs
Connector: RJ45 balanced – EMI Suppressed
Output Impedance: 100ohm, nominal 600ohm
Nominal Output Level: 0dBu
Max Output Level (clipping point): +14dBu
D/A conversion: 24 bit / 48 Khz
Signal To Noise Ratio (referred to peak level): >110dB
Stereo Separation (referred to peak level): >90dB
THD+N: <0,05%
Analog Balanced Telco Output
Connector: RJ45 Balanced – EMI Suppressed
Output Impedance: 23 Ω, nominal 600 Ω
Nominal Output Level: 0 dBu
Max Output Level (clipping point): +18 dBu
D/A conversion: 24 bit / 48 Khz
Signal To Noise Ratio (referred to peak level): >110 dB
THD+N: <0,002 %
Digital Output
Connector: Balanced on 1 XLR – EMI Suppressed
Input Impedance: 110 Ω
Standard: AES3
Audio Sample Rate: 32/44.1/48/96/192 KHz
Resolution: 24 bit
Dynamic Range (Converter Values): 124 dB
PSTN Interface
Connector: RJ11
Transhybrid loss: >20 dB
System
Audio Core: Analog Devices ADAU1452 32bit 294 MHz fixed point DSP
Audio CODECs: Cirrus CS42448 24 bit/192 kHz
LAN Connection: RJ45 - 1 Gbit
Nominal Delay: (analog input to analog output) 0,7 ms
GPIO Inputs/Outputs: 4 GPI/4 GPO on DB9, 4 GPI/2 GPO on Mic2 & Mic3 RJ45, 2 GPO on Out3 & Out4 RJ45, 1 GPI/1 GPO on Telco RJ45
Communication Port: 2xUSB type-A, 2xUSB type-B , 1xLAN, 1xHDMI
Operating Temperature: 0°C ÷ 40°C
Dimensions
8 Faders Dimensions (W, H, D): 584 mm/ 113,5 mm/ 495,5 mm
12 Faders Dimensions (W; H; D): 764 mm/ 113,5 mm/ 495,5 mm
16 Faders Dimensions (W; H; D): 944 mm/ 113,5 mm/ 495,5 mm
Weight: 15 to 25 Kg
PSU
Type: External Universal Switching Power Supply 12V with 4 poles XLR connections - Optional Redundant
Power: Supply 90-264 VAC / 50-60 Hz / 120 W